| Featured Space and Satellite Products |
|
|
| 100 V Radiation Hardened Solid-State Relay | |
Space Qualified Solid State Relay
from Infineon Technologies
|
| The RDHA710SE10A2SP from Infineon Technologies is a Space Qualified Solid State Relay with an output on-resistance of 0.070-0.100 ohms and a maximum output voltage of 100 V. It has a turn-on delay of 6.5-25 ms and a turn-off delay of 26-50 ms. It has an output capacitance of 365 pF. The relay has a hermetically sealed package with total dose capability of up to 100kRads (Si) and optically coupled. It has an 8-pin surface mount international rectifier’s R5 technology and actuated by standard logic inputs. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7.25-7.75 GHz X-Band Low Noise SATCOM Amplifiers | |
SATCOM Amplifier System
from Communications & Power Industries
|
| The LXA7S50 from Communications & Power Industries is a SATCOM Amplifier System with a frequency range of 7.25-7.75 GHz. This X-band amplifier system has a gain of 60 dB and a gain flatness of ±0.5 dB over the full band. It has gain stability of ±0.5 dB for long term and a maximum output power of -50 dBm. The amplifier system has a residual noise of -70 dBW/4 kHz and an AM/PM conversion of 1 degrees/dB. It has a maximum VSWR of 1.3:1 and requires a power supply of 90-265 VAC. |
| |
Download Datasheet
Product Details | |
|
|
|
| Three-Axis Magnetic Field Sensors | |
Magnetometer
from Bartington Instruments
|
| The Mag-13 U-TPU from Bartington Instruments is a Magnetometer with an unpacked 2-Part enclosure with low noise. This magnetometer has a measurement range of ±1000 µT and a frequency response of ±5% amplitude error DC to 100 Hz. It has a maximum bandwidth of 3000 Hz at full scale and scaling of 10 mV/µT. It is ideal for a magnetic field monitoring, feedback sensors in active magnetic field cancellation systems, magnetic signature measurements and electromagnetic surveys applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| DC-32 GHz Space-Qualified Fixed Attenuator | |
Space Qualified Fixed Attenuator
from Spectrum Control
|
| The 32J-30 from Spectrum Control is a Space Qualified Fixed Attenuator with a frequency range of DC to 32.0 GHz. This coaxial attenuator has a nominal attenuation of 30 dB and a deviation of +/- 2 dB. It supports SMK (2.92 mm) connectors and mates nondestructively with SMA (3.5 mm) and SMK (2.92 mm) connectors. It has a mass of 13 g and features a passivated stainless steel body and connectors with gold-plated beryllium copper contacts. It is suitable for space and airborne applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3.4-4.2 GHz C-band Low Noise Block for Video Applications | |
Low Noise Block
from Orbital Research
|
| The 3300 SERIES from Orbital Research is a Low Noise Block is a Low Noise Block with an input RF frequency of 3.4-4.2 GHz and an IF frequency of 950-1750 MHz. It has a gain of 60 dB and has a gain ripple value of ± 1 dB over any 36 MHz. It requires a DC supply of 12-24 V and has a current consumption of 250 mA. It has a mass of 500 g and measures 144 x 68 x 39 mm. This RoHS and REACH complaint LNB is a perfect choice for traditional C-band applications like video especially in rainy region. |
| |
Download Datasheet
Product Details | |
|
|
|
| Onboard Computer for CubeSats and Microsatellites | |
Satellite On-Board Computer (OBC)
from GAUSS Srl
|
| The Hercules from GAUSS Srl is an On-Board Computer (OBC) that is designed for CubeSats and microsatellites. It has a 4Mbit FRAM memory for critical information storage and 1Gbit Nor Flash memory and an SD card socket for high-density data storage. It requires a DC supply of 3.3-5 V and incorporates a dual-embedded IMU with 3 axis magnetometer for noise reduction along with an accelerometer and gyroscope. This On-Board Computer (OBC) weighs 65 grams and is ideal for safety-critical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-40 GHz Dual-Directional Coupler for Fixed Satellite Applications | |
Space Qualified Coupler
from Mini Circuits
|
| The ZDDC20-K0644 from Mini Circuits is a Space Qualified Coupler with an operating frequency range of 6-40 GHz. This dual-directional coupler has a coupling of 20 dB and a coupling flatness of +/- 0.4-1 dB. It has a mainline loss of 0.4-1.4 dB and a directivity of 10-29 dB. It has a power handling capacity of up to 20 W and requires a DC current supply of 0.63 A. This RoHS-compliant wideband coupler has a mass of 85 g with 2.92 mm female connector. It is ideal for 5G, mobile, fixed satellite and lab applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Performance Ku-Band VSAT Transceiver | |
SATCOM Transceiver
from Skyware Technologies
|
| The XRZ10F16 from Skyware Technologies is a Ku-Band SATCOM Transceiver that consists on an integrated BUC, LNB and OMT. The BUC upconverts an IF frequency from 950-1700 MHz to 12.8-14.5 GHz and the LNB downconverts an RF frequency from 10.7-12.75 GHz to 975-1060 MHz. It features high thermal margin housing and a high performance pre-fitted feed-horn. The CE-certified RoHS-2-compliant transceiver is an IP67 rated, compact, durable package with F-type connectors and measures 159 x 96.20 x 52 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 KOhm Space Qualified Surface Temperature Sensor | |
Space Qualified Temperature Sensor
from Variohm Eurosensor
|
| The 10K3A739 from Variohm Eurosensor is a Space Qualified Temperature Sensor with a beta value of 3892 K and a resistance of 10,000 Ohm. This temperature sensor time response of less than 25 sec (in air) and dissipation constant of 2 mW/degree C. It features a robust epoxy coated chip with copper leads. The sensor is ideal for satellite electric motors, monitoring of gearboxes in satellites, temperature compensation, battery power packs, panel temperature measurement and monitoring of actuators. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10-40 MHz Ultra-Miniature Precision TCXO for GPS Receivers | |
Space Qualified Oscillator
from Connor-Winfield Corporation
|
| The C13 from Connor-Winfield Corporation is a Space Qualified Oscillator with a frequency range of 10-40 MHz and a frequency stability of +/- 1.50 ppm. This temperature compensated crystal oscillator requires a DC supply voltage of 2.5 V. It has an SSB phase noise of up to -150 dBc/Hz. It produces clipped sine wave with an output voltage of 1 V peak-to-peak. This RoHS-compliant oscillator comes in an ultra-miniature 2.5 x 3.2 mm hermetically sealed ceramic SMT package and is ideal for use in GPS receivers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7.25-7.75 GHz X-Band Satellite Downconverter | |
Block Downconverter
from WORK Microwave
|
| The VHCD-X / VSCD-X from WORK Microwave is a Block Downconverter that has an input RF frequency range of 7.25-7.75 GHz and an LO frequency of 9.4-9.89 GHz. It supports remote control through RS232, RS422/485 (2-wire or 4-wire) interfaces, Ethernet supporting TCP/IP command interface, Web browser interface and SNMP. The converter features automatic reference recognition and an adjustable gain equalizer. It weighs 8.4 Kg (Indoor housing) and measures 483 x 44 x 505 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Solar Panel for Nanosat and Smallsat Missions | |
Satellite Solar Panel
from SPACEMANIC
|
| The SM-SP-RA-1U from SPACEMANIC is a Satellite Solar-Panel that is designed for Nano and Small satellites with a radiation tolerance of 2 years in LEO orbit. It has an open circuit voltage of 5.4 V. It is an integrated temperature sensor TI TMP112 and SLCD-61N8 photodiode and has two AZUR Space 30% Triple Junction GaAs Junction solar cells in a series configuration. This solar panel is ideal for applications such as communication, GNSS receiver or Iridium/Globalstar satellite communication system. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.9 mH Space Grade Current Sense Transformer | |
Space Qualified Power Transformer
from Vanguard Electronics
|
| The SCS103 from Vanguard Electronics is a Space Qualified Power Transformer with an inductance of 4.9 mH. It has a direct current resistance of 1.5 ohms. It features tin-lead terminations and welded internal connections. It has a minimum dielectric withstanding voltage of 500 VAC and a peak primary current of 13 A. The SCS103 is built to meet MIL-STD-981 specifications and is outgassing compliant as per ASTM E595. It comes in a surface mount package and measures 0.410 × 0.410 × 0.310 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.2m Ka-Band Auto Flyaway Antenna for SATCOM Applications | |
SATCOM Antenna
from Norsat
|
| The WFA120KA-UK from Norsat is a SATCOM Antenna with a transmit frequency range of 29-31 GHz and a receive frequency range of 18.7-21.2 GHz. It requires an AC supply voltage of 110-230 V and has a maximum power consumption of 550 W. It features an easy-to-use LinkControl interface and an automatic 3-axis acquisition. It weighs 32 Kg and measures 84.5 x 62 x 49 cm. The antenna offers rugged and reliable satellite links for remote enterprise, energy, emergency, and media applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 72 Mb Radiation-Hardened Synchronous Pipelined SRAM | |
Space Qualified Memory
from Infineon Technologies
|
| The CYRS1543AV18 from Infineon Technologies is a Space Qualified Memory with storage capacity of 72 Mb density. It is equipped with 1.8 V QDR II+ Four-word burst architecture with Cypress’s state-of-the-art RadStop technology with a radiation tolerance of up to 300 Krad total dose. The SRAM features separate independent read and write data ports for concurrent transactions and double data rate (DDR) interfaces on both read and write ports. It is suitable for military applications. |
| |
Download Datasheet
Product Details | |
|
