New products this week. View it in your browser
| | | Weekly Edition | | | Date: December 11, 2025 | | | |
| Sponsored by PCB Directory | | |
| Featured Space and Satellite Products | |
|
| 12 W Hybrid Point-of-Load DC-DC Converter | |
DC to DC Converter
from Modular Devices
|
| The 5085-P02.0 from Modular Devices is a 12 W Hybrid Point-of-Load DC-DC Converter designed to step an input of 4.6–5.4 VDC down to a stable +1.9–2.1 V output. Delivering an 82% efficiency rating, this converter ensures optimized power consumption for compact, high-density electronic systems. It maintains tight electrical performance with ≤50 mV line/load regulation, 20 MHz low-ripple output, and a radiation tolerance exceeding 100 kRad (Si), making it suitable for radiation-exposed space electronics. |
| |
Download Datasheet
Product Details | |
| | |
| 5-18 GHz Space-Grade Analog Phase Shifter | |
Analog Phase Shifter
from Pasternack
|
| The PE82P2000 from Pasternack is a Space-Qualified Analog Phase Shifter operating from 5–18 GHz, engineered for high-precision phase control in advanced RF and microwave systems. With a 400-degree maximum phase shift, 40 deg/GHz phase adjustment, and 40 degrees/volt phase sensitivity, it offers fine-tuned control for phased arrays and electronic warfare systems. This device provides 12 dB insertion loss, 8 dB return loss. It weighs up to 13.61 g and measures 27.43 x 18.03 x 7.37 mm. |
| |
Download Datasheet
Product Details | |
| | |
| DC-40 GHz Space Qualified Cable Assembly | |
Space Qualified Cable Assembly
from Cinch Connectivity Solutions
|
| The X1X2-16SQC-0012 from Cinch Connectivity Solutions is a Space-Qualified Cable Assembly engineered for high-frequency satellite and aerospace applications. Operating from DC to 40 GHz, it delivers exceptional RF performance with a VSWR of 1.4–1.5 and a 50-ohm impedance, ensuring low-loss, stable signal transmission across wide bandwidths. It meets NASA outgassing requirements, making it suitable for space missions and vacuum environments. The assembly incorporates passivated stainless steel M39012-compliant interfaces. |
| |
Download Datasheet
Product Details | |
| | |
| 93 pF Thin Film Binary MOS Capacitors | |
Space Qualified RF Connector
from Positronic
|
| The CBC Series from Positronic are Thin Film Binary MOS Capacitors designed for precision electronic and hybrid circuit applications. Offering a total capacitance of up to 93 pF with a ±10% capacitance tolerance, these capacitors provide exceptional accuracy and flexibility for demanding RF and microwave designs. Each CBC Series chip integrates five capacitors in binary increments, enabling easy and customizable capacitance value selection on a single compact device. They are available in a 0.044" × 0.044" chip footprint. |
| |
Download Datasheet
Product Details | |
| |
| Sponsored by PCB Directory | | PCB Directory Launches their Inaugural Magazine for the PCB Industry | | PCB Directory recently launched its Inaugural PCB Magazine for the PCB Industry. This magazine is packed with insightful articles, product listings, and an industry directory. The magazine is available in both print and digital versions. This achievement was made possible by the unwavering support of sponsors and contributors. Their trust and dedication have been the driving force behind this journey, and their support is highly appreciated. The team looks forward to continued growth and delivering even greater value to the PCB community. Click here to learn more. | | | |
| |
| 3.2-3.6 GHz Coaxial RF Circulator | |
Space Qualified Circulator
from Honeywell Aerospace
|
| The SG10524 from Honeywell Aerospace is a Space-Qualified RF Circulator engineered for dependable signal routing in mission-critical satellite, defense, and aerospace systems. Operating across the 3.2–3.6 GHz frequency band, it provides consistent, high-reliability performance for advanced RF subsystems. The circulator features a low insertion loss of 0.3–0.4 dB and isolation of 20–23 dB, ensuring efficient signal transmission with minimal reflection and interference. The SG10524 measures 25.4 x 25.4 x 12.7 mm. |
| |
Download Datasheet
Product Details | |
| | |
| 0.1-2000 MHz Space Qualified RF Amplifier | |
RF Amplifier
from Teledyne Microwave Solutions
|
| The AC2006-Space from Teledyne Microwave Solutions is a Space-Qualified RF Amplifier designed for high-reliability satellite and aerospace applications. Featuring an ultra-wide 0.1–2000 MHz bandwidth, this cascadable amplifier delivers +11 dBm output power and a 10.8 dB small-signal gain, ensuring stable, high-performance amplification across a broad frequency range. Engineered for precision RF systems, the AC2006-Space offers excellent gain flatness of ±0.25 dB and has a 5 dB noise figure. |
| |
Download Datasheet
Product Details | |
| | |
| 85 W Split Pulse-Tube Cryocooler | |
Space Cryocooler
from Thales Group
|
| The LPT 9510 COTS+ from Thales Group is a Split Pulse-Tube Cryocooler engineered for vibration-sensitive space and scientific applications. Delivering a cooling capacity of 1.4 W at 80 K with a maximum power input of 85 W, this cryocooler provides reliable and efficient thermal management for cryogenic instruments. Weighing under 3 Kg, the LPT 9510 COTS+ is optimized for missions requiring compact, lightweight, and dependable cryocooling performance. This cryocooler measures 18 x 122 x Ø 60 mm. |
| |
Download Datasheet
Product Details | |
| | |
| 128 Mb STT-MRAM for Hi-Rel Applications | |
Space Qualified Memory
from Frontgrade Technologies
|
| The UT8MRQ128M from Frontgrade Technologies is a Space-Qualified 128 Mb STT-MRAM memory device designed for high-reliability aerospace, defense, and industrial applications. Supporting dual QSPI operation up to 100 MHz SDR and 50 MHz DDR, it delivers fast, low-latency performance comparable to SRAM while maintaining flash-like non-volatility. Operating from a 2.50–3.60 V supply, the device consumes just 135 mW, offering a cost-effective and power-efficient memory solution for demanding systems. |
| |
Download Datasheet
Product Details | |
| |
| Sponsored by PCB Directory | | |
| |
| Satellite On-Board Computer for Deep Space | |
Satellite On-Board Computer (OBC)
from Space Inventor
|
| The Z7000-P3 from Space Inventor is a Satellite On-Board Computer (OBC) built on the powerful Xilinx Zynq-7030 SoC, which integrates a dual-core ARM Cortex-A9 MP-Core processor with an FPGA fabric featuring 125K programmable cells. Designed for advanced space missions, it supports both Linux and RTEMS real-time operating systems and includes 1 GB DDR3 RAM, 256 KB on-chip memory, and 32 KB high-endurance FRAM for persistent data storage. The OBC features a compact footprint measuring 91.14 x 94 x 13 mm. |
| |
Download Datasheet
Product Details | |
| | |
| Hi-Rel S-Band Multimode Transponder | |
Satellite Transponder
from L3Harris Technologies
|
| The C/TT-520 from L3Harris Technologies is a Hi-Rel S-Band Multimode Transponder designed to provide full-duplex spacecraft communications across NASA’s Space Network (SN), Ground Network (GN), Deep Space Network (DSN), and commercial tracking systems. Engineered for mission flexibility, it supports 2200–2300 MHz transmit frequencies and 2025–2110 MHz receive frequencies, ensuring robust compatibility with space communication standards. It supports data rates from 125 bps to 6 Mbps. |
| |
Download Datasheet
Product Details | |
| | |
| 5 V Hi-Rel DC-DC Converter | |
DC to DC Converter
from Mercury Systems
|
| The RH5210 from Mercury Systems is a High-Reliability DC-DC Converter designed to deliver efficient, multi-output power management for space and mission-critical systems. Operating from a 5 V input supply, it supports 11 integrated power rails along with their associated inductors, streamlining board design and reducing system complexity. Engineered specifically for the Xilinx XQRKU060 FPGA, the RH5210 features a die-based architecture optimized for SWaP, making it ideal for compact, high-performance spacecraft electronics. |
| |
Download Datasheet
Product Details | |
| | |
| 27-31 GHz GaAs HEMT Amplifier | |
RF Amplifier
from Northrop Grumman Corporation
|
| The APN228 from Northrop Grumman is a Space-Qualified Power Amplifier engineered for next-generation SATCOM terminals and point-to-point digital radio systems. Operating across the 27-31 GHz Ka-band, this GaAs HEMT-based amplifier delivers up to 19 dB linear gain and an impressive 42.8 dBm saturated output power, ensuring robust signal transmission in demanding orbital environments. It exhibits excellent RF performance characteristics with an input return loss of –35.5 to –17 dB and an output return loss of –20 to –15 dB. |
| |
Download Datasheet
Product Details | |
|
| | About SatNow | | SatNow is a product discovery platform for Space and satellite products/Services. We list over 20,298 Products from over 868 Manufacturers listed in 109 categories in our database and enable engineers to search for them using our customized parametric search tool. |
|
| To unsubscribe please click here | {{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}} |
|
