| Featured Space and Satellite Products |
|
|
| Ultra Miniature Magnetic Latching Relays | |
Space Qualified Solid State Relay
from FIRST SwitchTech
|
| The TL SERIES from FIRST SwitchTech is a Space Qualified Solid State Relay with a contact resistance range of 0.1-0.2 Ohms and has a latch and reset time of 2 ms. The relay has a bounce time of 1.5 ms and has an overload value of 2 A. It has a maximum dielectric strength value of 500 V rms and has a nominal contact rating power supply of 1 A. The relay has a maximum mass of 2 g and has a volume of 0.4 cm3. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.0 mH EMI Common-Mode Choke Inductor | |
Space Qualified Inductor
from Data Device Corporation
|
| The BCM-01004 from Data Device Corporation is a space-qualified EMI common-mode choke designed to suppress line-conducted noise in high-reliability power and signal applications. It provides an inductance of 1.0 mH per winding with balanced windings (±1%) and supports a rated RMS current of up to 2.5 A. It features a maximum DCR of 53 mΩ per winding and a leakage inductance of 5.75 µH. |
| |
Download Datasheet
Product Details | |
|
|
|
| DC-6 GHz Fakra to AMC4 Plug Cable Assembly | |
Space Qualified Cable Assembly
from Amphenol RF
|
| The 095-820-124-10Z from Amphenol RF is a RF Cable Assembly engineered for reliable high-frequency signal transmission in compact and space-constrained electronic systems. Designed with a controlled 50-ohm impedance, this RF cable assembly supports broadband operation from DC to 6 GHz, making it suitable for a wide range of applications such as high-speed RF connectivity in automotive, aerospace, and IoT. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3000 psi Launch Vehicle Actuator | |
Launch Vehicle Actuator
from Jansen Aircraft Systems Controls
|
| The 101405-1 from Jansen Aircraft Systems Controls is a Launch Vehicle Actuator engineered for flight surface control in manned spacecraft launch vehicles. It provides an unloaded frequency response of 5.1 Hz, enabling precise and responsive control of critical flight control surfaces during ascent and maneuvering phases. The actuator is optimized for compact integration within launch vehicle control architectures. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flight-Proven CubeSat Deployer | |
Satellite Deployer
from ISISPACE
|
| The QuadPack from ISISPACE is a Flight-Proven CubeSat Deployer designed to support small satellite missions ranging from 1U to 16U form factors. Engineered for reliable and controlled satellite release, the deployer provides a smooth ejection mechanism with a controlled deployment velocity between 0.8 and 1.8 m/s, ensuring safe separation and reduced mechanical stress on spacecraft. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400-8000 Wh Power Conditioning and Distribution Unit | |
Power Conditioning and Distribution Unit (PCDU)
from Ecuadorian Civilian Space Agency
|
| The Colossus PCDU Family from Ecuadorian Civilian Space Agency is a Space-Grade Power Conditioning and Distribution Unit engineered for missions ranging from small satellites to large spacecraft requiring high energy capacity, scalability, and redundancy. Designed to support demanding power architectures, the Colossus PCDU family delivers total energy capacities ranging from 400 Wh to 8,000 Wh. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| UHF SATCOM Transceiver from 395 to 440 MHz | |
SATCOM Transceiver
from Kongsberg NanoAvionics
|
| The CubeSat UHF from Kongsberg NanoAvionics is a SATCOM Transceiver designed to provide reliable UHF communications for CubeSat and SmallSat missions. Operating across the 395 to 440 MHz frequency range, this UHF radio supports telemetry, tracking, and command (TT&C) links for low Earth orbit satellite platforms. It supports in-orbit reconfigurability and in-orbit software updates. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5U Rack-Mount Waveguide Dehydrator | |
Dehydrator
from TSI Solutions
|
| The WDH2-5U-15-120 from TSI Solutions is a 5U Rack-Mount Waveguide Dehydrator engineered to deliver reliable, regulated dry air pressurization for RF waveguide and transmission line systems. Designed for high-availability and fail-safe operation, this dehydrator provides an adjustable output pressure range from 0.5 to 15 psig, making it suitable for a wide range of satellite, broadcast, and telecom infrastructure applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| S-Band Circular Antenna for Microsats & Smallsats | |
Satellite Antenna
from AAC Clyde Space
|
| The AC-2000 from AAC Clyde Space is a S-band Satellite Antenna designed for reliable RF communications in nanosatellite and small satellite missions. Operating across the 2000 to 2300 MHz frequency range, this antenna supports a wide bandwidth of 300 MHz, enabling flexible frequency planning for modern satellite payloads. This space-qualified S-band, lightweight satellite antenna is ideal for CubeSat and smallsat. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 mOhms Working Standard Resistor | |
Space Qualified Resistor
from Alpha Electronics
|
| The CSR-10N from Alpha Electronics is a Space Qualified Resistor with a resistance value of 10 mOhms and has an accuracy value of ±50 ppm. It has a temperature co-efficient value of ±5 ppm/°C and has terminals aligned in a single row for easier wiring and placement. The resistor has a power rating of 0.5 W and has a power co-efficient value of ±0.05 ppm/mW. It has a mass of 300 g and measures 100 x 65 x 66.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| L-Band Satellite Modem for IP Trunking & Cellular Backhaul | |
Satellite Modem
from Datum Systems
|
| The M7LT from Datum Systems is an L-band Satellite Modem designed to support high-throughput DVB-S2 and DVB-S2X communications for advanced satellite networks. The modem is well suited for dynamic SCPC and high-capacity IP traffic, delivering reliable performance in both fixed and adaptive satellite environments. This space-qualified MODEM is ideal for scalable satellite communication systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space Simulation Test Chamber | |
Thermal Vacuum Chamber
from Berlin Space Technologies
|
| The Thermal Vacuum Chamber from Berlin Space Technologies is a Space Simulation Test Chamber designed for the qualification and verification of space-grade hardware. Engineered for demanding thermal testing, the chamber supports thermal cycling gradients of up to 2 K/min, allowing precise simulation of orbital temperature transitions. It operates on a 220–400 V power supply with a current consumption of 3 A to 32 A. |
| |
Download Datasheet
Product Details | |
|
