| Featured Space and Satellite Products |
|
|
| Satellite Bus & Platform for LEO Satellites | |
Satellite Bus & Platform
from Dhruva Space
|
| The P-30 from Dhruva Space is a satellite bus and platform designed to support payloads in the 20–50 kg class, offering multi-payload accommodation for flexible mission configurations in Low Earth Orbit. Featuring a 3-axis stabilized attitude control system with pointing accuracy of up to 0.1°, it enables precise payload alignment for advanced space missions. This space-qualified platform supports both body-mounted and deployable solar arrays, enabling efficient and mission-optimized power generation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2000 psi Thrust Vector Control Actuator | |
Launch Vehicle Actuator
from Jansen Aircraft Systems Controls
|
| The 101424-4 from Jansen Aircraft Systems Controls is a Launch Vehicle Actuator engineered for the thrust vector angle on rocket engines. It is designed for high vibration and shock loads and has excellent frequency response characteristics. This aerospace actuator operates with a maximum hydraulic supply pressure of 2000 psi and delivers exceptional output force, producing up to 9460 lbf in extension and 6660 lbf in retraction. It offers an unloaded frequency response of 9 Hz. This actuator features a long stroke length of 2.86 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| 21–27 GHz GaAs Monolithic Power Amplifier | |
RF Amplifier
from United Monolithic Semiconductors
|
| The CHA4395-QDG from United Monolithic Semiconductors is a Space-Qualified RF Amplifier engineered for high-frequency microwave applications across the 21–27 GHz band. Designed using advanced GaAs pHEMT technology, this monolithic power amplifier delivers reliable low-noise performance with a noise figure of 4 dB and a small-signal gain of 22 dB, making it well suited for high-sensitivity RF front-end architectures. This amplifier provides an output power of up to 21 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Single-Stage Isolated DC-DC Converter | |
DC to DC Converter
from Frontgrade Technologies
|
| The 51028120-S from Frontgrade Technologies is a Single-Stage Isolated DC-DC Converter designed to deliver efficient, high-current power conversion in aerospace and space-grade electronic systems. It converts an input voltage range of 21–38 V into a tightly regulated output voltage of 1.0–1.2 V, providing up to 42 A of output current and delivering as much as 50 W of output power with efficiency exceeding 91%. This converter operates at a switching frequency of 433 kHz. It is rated for a total ionizing dose (TID) of 50 krads (Si). |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SATShow Week 2026 | | | |
|
|
| Space-Qualified Thermal Strap | |
Space Qualified Thermal Strap
from Thermal Space
|
| The Thermal LyNX from Thermal Space is a Space-Qualified Thermal Strap engineered to provide ultra-high thermal conductivity for mass-critical spacecraft applications. With a thermal conductivity of 1700 W/m·K, it enables efficient heat transfer in environments where conventional thermal solutions are limited by weight and flexibility constraints. It features a material density of 1.8 g/cc and a thermal conductivity-to-density ratio of 944, ensuring exceptional thermal performance with minimal mass impact. |
| |
Download Datasheet
Product Details | |
|
|
|
| Satellite Modem for SATCOM Communications | |
Satellite Modem
from Datum Systems
|
| The M7LT L-Band Sat-Terminal from Datum Systems is a modular satellite modem engineered for high-efficiency SATCOM communication across diverse network topologies, including Point-to-Point, Point-to-Multipoint, Mesh, unicast, and multicast architectures. Operating over the 950–2150 MHz frequency range, it supports data rates from 1.2 kbps to 59.04 Mbps with symbol rates up to 14.76 Msps. It supports modulation schemes from BPSK through 16QAM, with carrier roll-off factors as low as 5% to maximize bandwidth utilization. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka-Band Electronically Steered Antenna | |
SATCOM Antenna
from Get SAT
|
| The Sling Blade from Get SAT is a Ka-Band Electronically Steered Antenna (ESA) designed to deliver seamless broadband connectivity across GEO, MEO, and LEO satellite constellations. Featuring a low-profile, fully electronic beam steering architecture, it operates over a transmit frequency range of 27.5–31 GHz and a receive frequency range of 17.7–21.2 GHz. The antenna provides a maximum EIRP of 49 dBW and a maximum G/T of 5.31 dB/K, ensuring high link efficiency and optimized network performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 lbf Cold Gas Triad Thruster | |
Spacecraft Thruster
from VACCO Industries
|
| The 48003060 2 LBF COLD GAS TRIAD THRUSTER from VACCO Industries is a space-qualified propulsion system engineered to deliver a nominal thrust of 2 lbf for precise spacecraft maneuvering applications. Designed for controlled impulse generation, it supports attitude adjustments and translational maneuvers in crewed and uncrewed space platforms. This cold gas thruster is rated for a proof pressure of 630 psia and a burst pressure of 840 psia, ensuring structural reliability under pressurized operating conditions. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SATShow Week 2026 | | |
|
|
| 7–13 GHz Low Noise Amplifier | |
RF Amplifier
from ERZIA
|
| The ERZ-LNA-0700-1300-21-1-NS from ERZIA is a space-ready RF low noise amplifier designed to operate across the 7–13 GHz frequency band. Engineered for high-sensitivity signal reception, it delivers a small-signal gain of 23–25 dB with gain flatness of ±1 dB, ensuring stable amplification across wideband satellite communication and radar applications. This amplifier provides an output power (P1dB) of 9–13 dBm and achieves a low noise figure of 1-1.3 dB, enabling superior signal integrity in low-level RF front-end architectures. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Stage Suborbital Launch Vehicle | |
Satellite Launch Vehicle Platform
from Skyrora Ltd
|
| The Skylark L from Skyrora Ltd is a Single-Stage Suborbital Launch Vehicle designed to deliver research and technology demonstration payloads to altitudes exceeding 100 km. Powered by a high-test peroxide (HTP) and kerosene bipropellant propulsion system, it serves as a guided sounding rocket platform for microgravity experiments, atmospheric research, and flight qualification missions. With an overall length of 11.65 m and a diameter of 0.7 m, it has a lift-off mass of approximately 2,466 kg. |
| |
Download Datasheet
Product Details | |
|
|
|
| SATCOM Universal Redundancy Switch | |
SATCOM Redundancy Switch
from DEV Systemtechnik
|
| The DEV 1953 from DEV Systemtechnik is a SATCOM Universal Redundancy Switch designed to provide reliable RF path protection and automatic switching in satellite communication systems. Operating across the 950–2300 MHz frequency range with a characteristic impedance of 75 Ω, it supports high-availability SATCOM architectures requiring seamless redundancy management. This redundancy switch delivers RF return loss greater than 23 dB, insertion loss below 2 dB, and isolation up to 60 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Assembly JIG for CubeSat Platforms | |
Assembly JIG
from Serenum Space
|
| The CubeSat Vibration JIG from Serenum Space is an assembly and qualification JIG designed to support vibration testing campaigns for CubeSat platforms during pre-launch qualification. Engineered to meet standard launch qualification requirements, it enables secure and precise mounting of CubeSats during dynamic testing. This CubeSat JIG is available in 1U, 2U, 3U, 6U, and 8U configurations and extends the internal volume by 10 mm on each side, allowing integration of deployable mechanisms and subsystem interfaces. |
| |
Download Datasheet
Product Details | |
|
