PREV 23 April 2026 NEXT

New Satellite & Space Products this Week - 23 April 2026

23 April 2026 Newsletter - SatNow

New products this week. View it in your browser

New ProductsDirectoryNews.WhitepapersArticlesCalculatorsEventsWebinars
 
Weekly Edition
Date: 23 April 2026
 
Sponsored by MVG
 
 
Featured Space and Satellite Products
GNSS Simulator
Real-Time GNSS Simulator
GNSS Simulator  from LabSat

The LabSat Real-Time from LabSat is a real-time GNSS RF signal simulator designed to deliver precise, live satellite signal generation for testing, development and validation of navigation and positioning systems. It accurately replicates real-world GNSS conditions using current time-stamped data, enabling users to simulate signals from any global location for highly realistic and dynamic testing environments. Supporting a 3.3 V active antenna supply.
Download Datasheet Product Details
Earth Station Antenna
225–400 MHz SATCOM Fixed Helical Antenna
Earth Station Antenna  from TACO Antenna

The H-064A from TACO Antenna is a high-performance SATCOM fixed helical antenna designed for reliable communication across the 225–400 MHz frequency range. Engineered for military and satellite communication applications, it provides right-hand circular polarization with a gain of 11.9 dB and an axial ratio of 1.2 dB, ensuring strong and stable signal transmission. This antenna delivers a front-to-back ratio of 29.1 dB.
Download Datasheet Product Details
Space Qualified Atomic Clock
Space-Qualified Rubidium Atomic Clock
Space Qualified Atomic Clock  from Quartzlock

The E10-SPC from Quartzlock is a space-qualified rubidium atomic clock designed to provide ultra-stable frequency references for satellite and deep-space applications. Delivering a precise output frequency of 10 MHz, it enables highly accurate timing and synchronization for mission-critical systems. It maintains phase noise performance below –90 dBc/Hz at 1 Hz offset. It operates with a power consumption of approximately 35 W.
Download Datasheet Product Details
Solid State Recorder for Space
SLC NAND Flash Solid-State Recorder
Solid State Recorder for Space  from Comtech

The Proteus Plus Embedded – MO-300B mSATA from Comtech is a rugged solid-state recorder designed for embedded and mission-critical storage applications requiring high endurance and reliable performance. Available in 32 GB and 64 GB capacities, it utilizes industrial-grade SLC NAND flash technology to deliver more than 10 years of data retention and endurance exceeding 100,000 write cycles. Compact and durable, measuring 29.85 × 50.80 × 4.85 mm.
Download Datasheet Product Details
Sponsored by MVG
Space Qualified Antennas by MVG
Space Qualified Antennas by MVG – Antennas Ready to Launch
MVG space qualified antennas ensure superior performance and reliability of embedded satellite antenna systems. They are engineered with precision, designed for durability, and have been tested and qualified for the challenging conditions of space. Click here to learn more.
Satellite Bus & Platform
Flight-Proven 2U CubeSat Platform
Satellite Bus & Platform  from AAC Clyde Space

The 2U Structure from AAC Clyde Space is a flight-proven CubeSat platform engineered for lightweight and adaptable satellite missions requiring dependable mechanical integration. Designed for compatibility with all standard rail deployers, it provides a robust structural foundation for CubeSat payloads, avionics and subsystem integration. The platform has been designed and qualified to NASA GEVS specifications.
Download Datasheet Product Details
Cryocooler for Space
2.8 W Stirling Cryocooler for SmallSats
Cryocooler for Space  from West Coast Solutions, LLC

The SSC-X from West Coast Solutions, LLC is a Cryocooler developed for Missile Defense Agency (MDA) missions, supporting next-generation ballistic missile defense architectures through large constellations of small satellites. Based on an advanced Stirling-cycle design, it delivers a cooling capacity of 2.8 W at a cold tip temperature of 77 K while requiring only 32 W AC input power. It achieves approximately 20% Carnot efficiency at 80 K.
Download Datasheet Product Details
Satellite Terminal
Ka-Band SATCOM Ground Terminals
Satellite Terminal  from Extreme Waves

The Ka-Band 1024 from Extreme Waves is an electronically steerable phased array antenna engineered for advanced satellite communication and aerospace connectivity applications. Built on a fully planar and scalable architecture, it offers wide scan angle coverage, polarization agility and low-profile integration, making it ideal for LEO/GEO satellite terminals, airborne platforms, and defence communication systems.
Download Datasheet Product Details
Satellite Separation System
Space-Qualified Separation Systems
Satellite Separation System  from UARX Space

The SAU&RON 8" from UARX Space is a compact and high-reliability Separation Adapter Unit and Ride-On system designed for small satellite missions requiring a standardized 8-inch launch vehicle interface. Engineered with a robust clamp-band mechanism, it provides exceptional flexural stiffness of 7.04 × 107 Nm/rad. The system supports payloads of up to 80 kg, while maintaining a lightweight profile with a total mass starting below 1.4 kg.
Download Datasheet Product Details
Sponsored by MVG
 
 
Satellite Camera
1 m Ground Resolution Satellite Camera
Satellite Camera  from Chang Guang Satellite Technology

The PL-VC-1m-3200 from Chang Guang Satellite Technology is a Satellite Imaging Payload designed for video-based Earth observation missions. Operating in video imaging mode, it delivers a ground resolution of 1 m at an altitude of 535 km, enabling reliable medium-resolution imaging for a range of observation applications. This payload utilizes a panchromatic sensor with a spectral range of 430–730 nm.
Download Datasheet Product Details
DC to DC Converter
7 V Single-Stage Isolated DC-DC Converter
DC to DC Converter  from Frontgrade Technologies

The 51028700-S from Frontgrade Technologies is a Single-Stage Isolated DC-DC Converter designed to deliver efficient, high-current power conversion in aerospace and space-grade electronic systems. It converts an input voltage range of 21–38 V into a tightly regulated output voltage of 7 V, providing up to 4.2 A of output current and delivering as much as 50 W of output power. It requires a supply voltage of 21-38 V.
Download Datasheet Product Details
Space Qualified Circulator
17.3-33 GHz Space-Flight Circulator
Space Qualified Circulator  from DiTom Microwave

The DSC1722 from DiTom Microwave is a Space-Qualified RF Circulator designed for reliable signal routing and isolation. Operating across the 17.3 to 33 GHz frequency range, this space-flight circulator provides a minimum isolation of 20 dB, helping to protect sensitive RF components from reflected power and signal interference. The circulator features a low insertion loss of up to 0.6 dB and maintains a minimum VSWR of 1.25:1.
Download Datasheet Product Details
Space Qualified Isolator
Space-Qualified Drop-In Isolator
Space Qualified Isolator  from HzBeat

The HDIF1805T1880M from HzBeat is a Space-Qualified Drop-In Isolator engineered for reliable signal protection and power handling in satellite, aerospace and high-frequency communication systems. Operating across a frequency range of 1.805 to 1.880 GHz, it is designed to minimize reflected power and maintain signal integrity in demanding RF environments. With continuous wave (CW) power handling of up to 250 W.
Download Datasheet Product Details
About SatNow
SatNow is a product discovery platform for Space and satellite products/Services. We list over 21,036 Products from over 922 Manufacturers listed in 109 categories in our database and enable engineers to search for them using our customised parametric search tool.
To unsubscribe please click here{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}
Advertisement