PREV June 11, 2026 NEXT

New Satellite & Space Products this Week

June 11, 2026 Newsletter - SatNow

New products this week. View it in your browser

New ProductsDirectoryNews.WhitepapersArticlesCalculatorsEventsWebinars
 
Weekly Edition
Date: June 11, 2026
 
Sponsored by PCB Directory
 
 
Featured Space and Satellite Products
Satellite GNSS Receiver
Satellite GNSS Receiver for CubeSats
Satellite GNSS Receiver  from SkyFox Labs

The piNAV-NG from SkyFox Labs is a Satellite GNSS Receiver designed for CubeSats, small satellites and high-altitude scientific missions requiring continuous and reliable position determination. This ultra-low-power GPS L1 receiver consumes only 125 mW, enabling nonstop operation within the limited power budgets of CubeSat platforms. It supports navigation at altitudes of up to 3600 km and velocities of up to 9 km/s in the Flight Model, making it suitable for Low Earth Orbit missions and advanced space applications.
Download Datasheet Product Details
Space Transmitter
W-Band Right-Angle Transmitter Module
Space Transmitter  from ReliaSat

The W-x8TX-RA-9296 from ReliaSat is a W-band transmitter module designed for high-frequency communication, radar and sensing applications. Operating across a frequency range of 92–96 GHz with an IF input range of 2–6 GHz, it enables high-resolution signal transmission for advanced aerospace and defense systems. This transmitter utilizes a local oscillator frequency range of 10.8–11.4 GHz and provides a gain of 13 dB. It delivers a saturated output power of 15 dBm.
Download Datasheet Product Details
Satellite Antenna
High-Reliability Satellite Antenna
Satellite Antenna  from NewSpace Systems

The LYRA-S-PIN (S-BAND PIN) from NewSpace Systems is a high-reliability satellite antenna designed for S-band communication links in spacecraft telemetry, tracking and data transmission applications. Operating across the 2200–2290 MHz frequency range, it provides dependable communication performance for small satellite and spacecraft missions. This active antenna delivers a gain of 6 dB and features an 80° beamwidth. It achieves an axial ratio of 3 dB and supports either RHCP or LHCP.
Download Datasheet Product Details
Software Defined Radio
Software Defined Radio and DSP System
Software Defined Radio  from Rincon Research Corporation

The XSDR from Rincon Research Corporation is a software-defined radio (SDR) platform designed for advanced signal collection, processing, communication and electronic intelligence applications. Built around an Xilinx Zynq Z7045 FPGA and dual-core ARM Cortex-A9 processor SoC, this compact SDR family consists of the LPFE DSP base card along with interchangeable RFXR and IFXR mezzanine cards. The RFXR transceiver module operates from 70 MHz to 6 GHz with a tunable IF bandwidth of up to 56 MHz.
Download Datasheet Product Details
Sponsored by PCB Directory
PCB Directory
PCB Directory Launches their Inaugural Magazine for the PCB Industry
PCB Directory recently launched its Inaugural PCB Magazine for the PCB Industry. This magazine is packed with insightful articles, product listings, and an industry directory. The magazine is available in both print and digital versions. This achievement was made possible by the unwavering support of sponsors and contributors. Their trust and dedication have been the driving force behind this journey, and their support is highly appreciated. The team looks forward to continued growth and delivering even greater value to the PCB community. Click here to learn more.
Satellite Antenna
Ka-Band Choke Ring Satellite Antenna
Satellite Antenna  from Anywaves

The Choke Ring TT&C Ka-band Antenna from Anywaves is a high-performance telemetry, tracking, and command (TT&C) antenna designed for satellite and space communication applications in the Ka-band. Available in dedicated transmit and receive configurations, it operates across the 19.7–20.2 GHz and 29.5–30 GHz frequency bands, delivering reliable signal transmission and reception for demanding space missions. Its advanced choke ring architecture minimizes multipath interference.
Download Datasheet Product Details
Spacecraft Thruster
Hall Effect Thruster for High-Impulse Missions
Spacecraft Thruster  from ExoTerra Resource, LLC

The Halo12 from ExoTerra Resource, LLC is a Hall effect thruster designed to provide efficient electric propulsion for demanding orbital and deep-space missions. Engineered for high-impulse applications, it supports a wide range of spacecraft maneuvering requirements, including orbit raising, station keeping, and interplanetary transfer operations. This spacecraft thruster delivers a thrust range of 11–100 mN and achieves a specific impulse between 900 and 2000 seconds, enabling efficient propellant utilization and extended mission capability.
Download Datasheet Product Details
SATCOM Antenna
FlyAway Ku-Band VSAT SATCOM Antenna
SATCOM Antenna  from AvL Technologies

The Model 1098FA-85 from AvL Technologies is a SATCOM Antenna designed for mobile VSAT FlyAway applications in the Ku-band. It features an 85 cm single-piece AvL composite reflector with an optional three-piece reflector configuration, providing deployment flexibility for field operations. Built around a motorized elevation-over-azimuth positioner, the antenna supports rapid deployment with a setup time of approximately 10 minutes and one-button auto-acquisition capability.
Download Datasheet Product Details
RF Amplifier
DC to 70 GHz Distributed Amplifier MMIC
RF Amplifier  from Marki Microwave

The AMM-9024CH from Marki Microwave is a Distributed Amplifier MMIC designed for broadband amplification across RF, microwave and millimeter-wave systems. Operating from DC to 70 GHz, it provides wideband performance for demanding applications including SATCOM, radar, electronic warfare, aerospace and test and measurement systems. The amplifier delivers a small-signal gain of 11.5 dB and a saturated output power of up to 14 dBm, enabling efficient amplification across an exceptionally broad frequency range.
Download Datasheet Product Details
Sponsored by PCB Directory
 
 
Satellite Modem
Satellite Modem for SCPC/MCPC Networks
Satellite Modem  from Datum Systems

The M7 from Datum Systems is a Satellite Modem designed for SCPC and MCPC communication networks requiring high efficiency, flexibility and advanced IP networking capabilities. Supporting point-to-point, point-to-multipoint, mesh and multicasting architectures, it is well suited for cellular backhaul, enterprise connectivity, IP networking and bandwidth-on-demand applications. The modem delivers data rates from 1.2 kbps to 59 Mbps, enabling reliable operation across a wide range of satellite communication environments.
Download Datasheet Product Details
Low Noise Block
X-Band Low Noise Block Downconverter
Low Noise Block  from AmpliTech

The APT5-LNB-XBAND from AmpliTech is an X-band low noise block downconverter designed for satellite communication applications requiring high-performance signal reception and frequency conversion. Operating with an input frequency range of 7.75–8.5 GHz and converting signals to an output frequency range of 800–1550 MHz, it enables efficient interfacing with L-band communication equipment and receivers.This low noise block utilizes a local oscillator frequency of 6.95 GHz.
Download Datasheet Product Details
Sun Sensor
High-Precision Sun Sensor for Small Satellites
Sun Sensor  from PYXIS SPACE

The SUN SENSOR from PYXIS SPACE is a compact high-precision sun sensor designed to provide reliable solar vector measurements for small satellite attitude determination and control systems. Engineered for CubeSats and small spacecraft, it delivers accurate sun-tracking data while maintaining low size, weight and power requirements. This sun sensor provides a standard measurement accuracy of 1° and can achieve pre-calibrated accuracy of up to 0.2°. It supports data update rates of up to 10 Hz.
Download Datasheet Product Details
Space Qualified Memory
Space Qualified SSD Memory
Space Qualified Memory  from Aitech

The S993 from Aitech is a Space Qualified Memory SSD designed for high-reliability data storage and management in NEO, LEO, GEO and lunar exploration missions. Integrating a radiation-tolerant PolarFire FPGA with high-capacity NAND Flash memory, it provides dependable storage performance and high data bandwidth for demanding space applications. This SSD offers 256 GB of storage capacity.This space-qualified SSD is characterized to withstand total ionizing doses of up to 50 krad (Si).
Download Datasheet Product Details
About SatNow
SatNow is a product discovery platform for Space and satellite products/Services. We list over 21,793 Products from over 954 Manufacturers listed in 109 categories in our database and enable engineers to search for them using our customised parametric search tool.
To unsubscribe please click here{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}
Advertisement