| Featured Space and Satellite Products |
|
|
| 10-bit Analog-to-Digital Converter | |
Analog to Digital Converter
from Teledyne e2V Semiconductors
|
| The EV10AS152A from Teledyne e2V Semiconductors is a high-linearity Analog-to-Digital Converter (ADC) designed for broadband RF applications, high-speed instrumentation and advanced data acquisition systems. Delivering 10-bit resolution with sampling rates of up to 3 Gsps, it enables accurate digitization of high-frequency signals across demanding communication and measurement platforms. Designed for high-speed digital receiver architectures, the EV10AS152A operates from multiple supply rails of 5.0 V, 3.3 V and 2.5 V while supporting advanced power-management modes. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3.4-4.2 GHz Low Noise Amplifier System | |
RF Amplifier
from Narda-MITEQ
|
| The LN2-340420-35 from Narda-MITEQ is a High-Reliability 1:2 Redundant Low-Noise Amplifier (LNA) system engineered to provide continuous RF signal amplification in critical satellite communications and earth station applications. Operating across the C-band frequency range of 3.4 to 4.2 GHz, this LNA system features a maximum noise temperature of 35 K and delivers a typical gain of 52 dB. Operating from a wide input voltage range of 90 to 250 VAC, the system consumes approximately 20 W during normal operation and up to 50 W during switchover events. |
| |
Download Datasheet
Product Details | |
|
|
|
| X-Band GaN-on-SiC Power Transistor | |
GaN Power Transistor
from Integra Technologies, Inc.
|
| The IGT8994M50 from Integra Technologies, Inc. is a GaN Power Transistor designed for high-power X-band radar systems operating from 8.9 to 9.4 GHz. Based on advanced GaN-on-SiC HEMT technology, it delivers more than 50 W of peak output power under 200 µs pulse width and 10% duty cycle operating conditions. With a power gain of 10 to 12 dB and a power-added efficiency of up to 43%. This high-performance RF transistor operates from a 50 V supply and is fully matched to 50 Ω impedance at both the input and output, simplifying system integration. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.42 mH Space Grade Isolation Transformer | |
Space Qualified Power Transformer
from Vanguard Electronics
|
| The SIT227 from Vanguard Electronics is a Space-Qualified Isolation Transformer designed to provide reliable power conversion and electrical isolation in aerospace, satellite and other high-reliability electronic systems. Featuring an inductance of 0.42 mH and a turns ratio of 1:1.1, it operates with a primary voltage of 40 V, enabling efficient energy transfer and stable performance in mission-critical power management applications. The transformer also offers a direct current resistance of 0.56 ohms and a minimum dielectric withstanding voltage of 300 VAC. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCB Directory | | PCB Directory Launches their Inaugural Magazine for the PCB Industry | | PCB Directory recently launched its Inaugural PCB Magazine for the PCB Industry. This magazine is packed with insightful articles, product listings, and an industry directory. The magazine is available in both print and digital versions. This achievement was made possible by the unwavering support of sponsors and contributors. Their trust and dedication have been the driving force behind this journey, and their support is highly appreciated. The team looks forward to continued growth and delivering even greater value to the PCB community. Click here to learn more. | | | |
|
|
| 5.5-8.5 GHz Solid State Power Amplifier | |
RF Amplifier
from Triad RF Systems
|
| The TA1165 from Triad RF Systems is an RF Amplifier designed for Low Earth Orbit (LEO) satellite communication systems requiring high efficiency and reliable RF performance. Based on Class AB GaN technology, this amplifier operates over a frequency range of 5.5 to 8.5 GHz and delivers a saturated output power of 43 dBm with a small-signal gain of up to 52.5 dB. Designed to support a wide variety of signal types and modulation formats, including DVB, DVB-DSNG and DVB-S2.This space-proven amplifier operates from a wide 12 to 30 VDC input supply. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space Qualified Chip Capacitors | |
Space Qualified Capacitor
from Exxelia Technologies
|
| The CEC/CNC Series from Exxelia Technologies is a series of Space Qualified Capacitors designed for high-reliability aerospace, defense and satellite applications. These capacitors are available in case sizes ranging from 0402 to 3040 and utilize NPO, BX, 2C1 and X7R dielectric materials to support a broad range of high-performance electronic systems. Offering capacitance values from 1 pF to 12 µF and rated voltages from 10 VDC to 1000 VDC, the series provides flexible solutions for demanding space and defense designs. They are available with capacitance tolerance ranging from ±0.25 pF to ±20%. |
| |
Download Datasheet
Product Details | |
|
|
|
| C-Band Branchline Quadrature Coupler | |
Space Qualified Coupler
from Smiths Interconnect
|
| The CWC402 from Smiths Interconnect is a space-qualified branchline quadrature coupler designed for signal splitting and combining applications in satellite, aerospace and defense communication systems. Operating across the C-band frequency range of 3.4–4.2 GHz, it provides stable RF performance for high-reliability payload and communication architectures. This coupler delivers a maximum insertion loss of 3.5 dB and maintains amplitude balance within ±0.3 dB, ensuring accurate power distribution and phase consistency between output ports. |
| |
Download Datasheet
Product Details | |
|
|
|
| DC–40 GHz Space-Qualified RF Diplexer | |
Space Qualified RF Diplexer
from SHF Communication Technologies
|
| The SHF DX45R | X01 from SHF Communication Technologies is a space-qualified RF diplexer. Operating with a high-frequency path extending from approximately 1.2 GHz to 32 GHz and a low-frequency path from DC to 600 MHz, this diplexer enables efficient routing of RF and low-frequency signals through a single transmission line. Based on SHF’s resonance-free air-line construction, it delivers a low insertion loss of 1.5 dB and an exceptionally low group delay ripple of ±50 ps, ensuring high signal integrity and minimal distortion across wide bandwidths. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCB Directory | | |
|
|
| X-Band Low Noise Block Down Converter | |
Low Noise Block
from Comtech Telecommunications Corp.
|
| The X-Band Low-Noise Block from Comtech Telecommunications is a Low Noise Block designed for commercial and military satellite communication systems operating across the 7.25 to 7.75 GHz frequency range. Engineered for transportable terminals, VSAT networks and large earth station installations, it converts received X-band signals to a 950 to 1450 MHz intermediate frequency while delivering low noise performance and high signal stability. The unit achieves a noise temperature of 40–45 K and provides gain options from 50 to 60 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Magnetorquer for LEO Satellites | |
Magnetorquer
from Space Inventor
|
| The MT-P4 from Space Inventor is a Magnetorquer designed for momentum dumping of Low Earth Orbit (LEO) satellites. It delivers a nominal dipole moment of 2 Am² and is optimized for low-power operation and consuming only 250 mW at nominal magnetic dipole output. It features an annealed alloy core wound with enameled copper wire and incorporates an integrated controller for efficient attitude control and momentum management in small satellite missions. It supports CAN communication with the CSP 2.0 protocol and provides a low residual dipole, ensuring precise magnetic actuation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thermal Vacuum Chamber for Space Simulation | |
Thermal Vacuum Chamber
from Weiss-Technik
|
| The TVC – Space Simulator 20m³ from Weiss-Technik is a thermal vacuum chamber designed to replicate the extreme environmental conditions encountered in space. Engineered for aerospace qualification and research applications, it enables comprehensive testing of spacecraft, electronic systems and space-bound hardware under realistic vacuum and thermal conditions. This thermal vacuum chamber provides vacuum capabilities down to 1.10-7 mbar and supports an operating temperature range from –135°C to +150°C, allowing accurate simulation of orbital and deep-space environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Rated X-band Up/Down Converter | |
Block Up/Down Converter
from Orbital Research
|
| The X-band Up/Down Converter from Orbital Research is a space-rated frequency converter designed for integrated uplink and downlink signal translation in CubeSat and SmallSat communication systems. Operating across X-band frequencies of 7.25 to 8.5 GHz for transmit applications and 7.9 to 10 GHz for receive applications, with an IF frequency range of 1000 to 6000 MHz, it enables flexible RF signal conversion for Earth observation and satellite communication missions. This converter utilizes a 12.4 GHz local oscillator and provides an adjustable gain range from -2 to 28 dB in 0.25 dB steps. |
| |
Download Datasheet
Product Details | |
|
